Thus it requires special tooling to machine the steel. You may face hard times to drill the steel with carbide or diamond. It can be forged from yellow heat.
The drilling of hard-to-cut high manganese steel materials is a difficulty in the field of machining. Research method for drilling temperature which has...
2021年10月21日 — The body of the drill bit should have good rigidity and strength, generally made of 40Cr, and the length should be as short as possible. The...
Drilling · reinforced shape, long twist · point angle at 130° · low cut speed 2 to 3m/min (80 to 120″/min) · high feed, for example: 0.08mm/rev to 0.15mm/rev (0.003...
2018年2月25日 — Manganese steel work hardens very rapidly. It is almost impoosible to machine by conventional means like saws and blades, as the steel will quickly harden.
2024年4月9日 — Manganese steel, while presenting some challenges in machining, can still be drilled with success using diamond or carbide tools. When forging...
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
we were very satisfied, got to know your company better, and found that you always adhere to the corporate philosophy of good faith, and we appreciate this attitude.
This company continuously trains its employees, accumulates product production experience, continuously carries out technological innovation, and can really provide customers with excellent products.
Your company has always enjoyed a good reputation in the industry, and you have always taken "integrity" and "pragmatism" as your core culture, and the quality of your products is very good.